http://www.engineeringnews.co.za
R/€ = 15.75 Change: 0.05
R/$ = 13.31 Change: -0.06
Au 1308.59 $/oz Change: -1.15
Pt 941.00 $/oz Change: 0.00
 

Corrosion Control News

Paint company works on giant excavator in Czech Republic

     1st June 2012 Coatings and paint company Hempel Paints has collaborated with technical design company Noen, in the Czech Republic, on a project involving the design and manufacture of a new type of bucket-wheel excavator, the KK1300. 

Specialist proposes solution to electrostatic charges

     1st June 2012 The use of modern environment-friendly hydraulic and lubrication oils, together with the trend towards more compact systems and finer filtration has, in recent years, exacerbated the problem of electrostatic charge and discharge, says fluid power specialist Hydac. 

Thermal spray coatings effective in combating, controlling corrosion

     1st June 2012 The manner in which the surfaces of components interact with each other in a system and within their immediate environment makes them susceptible to corrosion, erosion, abrasion and wear damage.  

New partnership for waterless engine coolants

By: Dimakatso Motau     13th April 2012 A new alliance has seen the formation of Evans South Africa to market the Evans range of waterless engine coolants throughout the Southern African region. 

Hot dip galvanising of fasteners to be reviewed

By: Idéle Esterhuizen     17th June 2011 The local practice of the hot dip galvanising of nuts and bolts is under review, as the industry aims to adhere more strictly to specifications set by the International Organisation for Standardisation (ISO), says Hot Dip Galvanisers Association of South Africa (HDGASA) executive director Bob... 

New academy plans to take industry training to a new level

By: Idéle Esterhuizen     27th May 2011 Newly launched corrosion protection training academy Corrosion Education aims to contribute to poverty reduction, youth empowerment and educational and economic skills development in South Africa, managing member Angie Mabena tells Engineering News. 

Conversion to greener coatings a challenge

By: Idéle Esterhuizen     27th May 2011 Going green, through the use of greener coatings poses an important challenge to the South African corrosion protection industry, says corrosion protection specialist Bulldog Projects founder and CEO Mike Book. 

Institute stresses importance of corrosion protection

     27th May 2011 The Corrosion Institute of Southern Africa (CorrISA) has launched a corrosion awareness course aimed at nontechnical individuals in the industry. 

Manufacturer to expand sales to retail sector

By: Idéle Esterhuizen     27th May 2011 Demand has driven chemicals and aerosol manufacturer Specialised Maintenance Products (SMP) to expand its supply chain by introducing its F61 industrial corrosion protection aerosol range to retail outlets, says MD Troy Barwell. 

New gauge range to set higher standards

By: Idéle Esterhuizen     27th May 2011 UK-based coatings and concrete inspection equipment specialist Elcometer says its new generation Elcometer 456 digital coating thickness gauge sets new standards in coating-thickness measurement. 

Safomar subsidiary to start supplying stock management system to industrial businesses in June

By: Mary-Anne O’Donnell     27th May 2011 Aerospace and industrial products supplier Safomar Industrial Brands (SIB), a division of Safomar Holdings, is hoping to extend its new total stock management system (TSMS) to medium-sized and large industrial businesses, in June this year. 

Use of inferior materials damages industry reputation

     27th May 2011 South African paint manufacturers who use cheap, inferior resins in their mixes to save money, lower paint quality and damage the reputation of the coatings industry, warned international resin producer Uniresins operations director Sanjeev Bhatt.  

Course developed in cooperation with British expert

     11th June 2010 The Southern African Institute of Welding (SAIW) Painting Inspector course, which plays a critical role in developing and expanding the skills and expertise of plant and construction inspectors, has been refreshed and revitalised, bringing it in line with worldwide best practice, reports the... 

Cracking the sour service challenge

     28th May 2010 South Africa’s national minerals technology institute Mintek has developed a unique laboratory facility for testing the susceptibility of alloys to corrosion and hydrogen-induced cracking under the conditions known as ‘sour service.’ 

UV-cured corrosion protection products enter local market

By: Eleanor Seggie     28th May 2010 Chemical and aerosol manufacturer Specialised Maintenance Products (SMP) reports that it is the first Southern African distributor of the SolarTech ultraviolet- (UV-) cured product range, which provides seamless protection against corrosion, abrasion and other aggressive environmental conditions.  

Water utility cathodic protection contract renewed

By: Eleanor Seggie     28th May 2010 Cathodic protection manufacturer Disa Anodes has been awarded a contract, worth R11-million, to supply 5 000 anodes to revamp State-owned water utility Rand Water’s corrosion prevention systems.  

Manufacturer battles Chinese competitors

By: Eleanor Seggie     15th January 2010 Cathodic protection manufacturer Disa Anodes says that the company faces massive competition from China and other Asian countries and is receiving very little support from government and the local industry. The company, which is only a corrosion protection anodes and ancillary equipment... 

SA’s first lubricants franchise being set up 

By: Darren Parker     14th August 2009 Lubricant blender and supplier Blue Chip Lubricants is overhauling its branding and business structure, and this includes expanding through the establishment of a lubricants franchise, the first of its kind in South Africa. 

Corrosion protection 
company focused on 
skills development

By: Darren Parker     29th May 2009 Corrosion protection company Virgo Business Consulting (VBC) reports that the company is focussed on skills development, given its new-entrant status in the corrosion painting market. 

Fibre-reinforced backing developed for polyurethane liners

By: Darren Parker     29th May 2009 South African polyurethane (PU) product producer Uretech has developed a fibre-reinforced backing for its range of PU liners, which allows the liners to be lighter compared with traditional steel-reinforced backing. It is also significantly less costly than steel-reinforced liners, yet just as... 

Nanotechnology-based lubricant reduces 
gear wear

     29th May 2009 Clean technology company, and provider of nanotechnology-based products, ApNano Materials, reports that its nanotechnology-based lubricant NanoLub, significantly decreases damaging wear pits on gear teeth. 

National tribology study forges ahead

By: Darren Parker     29th May 2009 The South African Institute of Tribology (SAIT) has acquired the necessary funding to initiate a study of the costs associated with not conforming to leading practice principles in the field of tribology, in the country.

 

Skills transfer, capacity building imperative in corrosion control industry 

By: Darren Parker     29th May 2009 The attraction, retention and development of necessary skills and knowledge within the field of corrosion is a significant challenge for the South African corrosion control industry, says Corrosion Institute of Southern Africa (CorrISA) president Deon Slabbert.  

Conference emphasises the high costs of corrosion

By: Jacqueline Holman     30th May 2008 The direct cost of corrosion in South Africa equates to about R150-billion a year, Corrosion Institute of Southern Africa’s (CorrISA’s) president, Deon Slabbert, told industry participants at the second Annual Corrosion Control Conference in April. 

Energy crisis drives increased interest, research in tribology

By: Jacqueline Holman     30th May 2008 Energy supply shortages in South Africa and internationally have resulted in an increased focus on tribology, South African Institute of Tribology’s (SAIT’s) president Patrick Swan tells Engineering News. 

New advances improve waterborne maintenance coatings

     30th May 2008 Performance levels of waterborne maintenance coatings are now equal to or even better than the capabilities of solvent-borne coatings, resulting from advances in polymer design and formulation, says chemical specialist Rohm and Haas. 

Value-add division supplies products for advanced corrosion protection products

By: Jacqueline Holman     30th May 2008 Value-add division of Robor, Pipe Systems, supplies piping solutions, in which corrosion protection plays a large part, to projects in the mining, water reticulation, gas and petrochemical industries. 

Online real-time corrosion monitoring growing globally

By: Brindaveni Naidoo     4th April 2008 The use of online real-time corrosion monitoring transmitters is growing internationally, says global industrial supplies manufacturer Honeywell process solutions engineer Ayman Mehdawe. 

A corrosion solution to ‘pig-out’ on

By: Guy Copans     1st June 2007 Significant time and money could be saved in the mechanical and chemical cleaning, surface preparation and re-coating of underground water reticulation pipe lines in South Africa, through the use of on-site Pipe Pigging technology, says Corrosion Engineering Specialists, Corrocoat South Africa�s... 

Galvanising a hot topic, says industry body

By: Guy Copans     1st June 2007 Hot-dip galvanizing in South Africa is currently experiencing a boom, says the Hot-Dip Galvanizers Association of Southern Africa (HDGASA) executive director Bob Wilmot. 

Oil additive prevents corrosion 

By: Guy Copans     1st June 2007 Lubricant-manufacturer PS23 offers an oil additive to consumers that has a range of functions including an improved anticorrosive ability, reduced friction and fortified oil film strength, says PS23 director Sean Van Rij. 

Container-handling spreaders refurbished

By: Laura Tyrer     28th April 2006 Specialising in port equipment and container-handling equipment in particular, CPS Projects, of Kwazulu-Natal, has recently conducted the complete refurbishment of seven Bromma container-handling spreaders for the Durban Container Terminal. 

Lube pump installed on front-end loader

     21st April 2006 FloSolve’s Western Cape distributor, Calberg Lubrication, has installed a Vogel GSE multi-outlet driven pump for a centralised lubrication system on a Komatsu WA800 front-end loader for Namakwa Sands on the West Coast. 

New filter range unveiled

     17th March 2006 A brand-new range of filters, regulators and lubricators has just been released by Ernest Lowe under its own Elco label. 

Machine tool retrofitter only uses German lube systems

     23rd September 2005 East Rand machine tool retrofitter Autonumerics Machine Tools installs only German-manufactured Vogel lubrication equipment on the milling machines and lathes that it refurbishes. 

Corrosion control kudos

By: peter cromberge     2nd September 2005 The overall joint winners of the 2005 Eskom Hot Dip Galavanizing Awards, hosted by the Hot Dip Galvanizers Association on August 19 in Johannesburg, are the MTN Headquarters Building and the Kwik Fab Projects (KFP) Tread Steer Bogie project. 

US cryogenic treatment system is now in SA

By: Jade Davenport     15th July 2005 The science of extreme low-temperature engineering in the form of US-based Cryogenics International’s patented controlled deep cryogenic treatment systems and processes to improve the metallurgical and structural properties of metals, plastics and other materials is now available in South... 

Latest News

more

Latest Videos

more

Research Reports

Topics In These Articles

RSS Feed

About

Engineering News is a product of Creamer Media.
www.creamermedia.co.za

Other Creamer Media Products include:
Mining Weekly
Research Channel Africa
Polity

Read more

Subscriptions

We offer a variety of subscriptions to our Magazine, Website, PDF Reports and our photo library.

Subscriptions are available via the Creamer Media Store.

View store

Advertise

Advertising on Engineering News is an effective way to build and consolidate a company's profile among clients and prospective clients. Email advertising@creamermedia.co.za

View options
Free daily email newsletter Register Now
Register Close